Melbourne, Australia – April 7: M2M Connectivity announces that connectBlue has added Internet of Things (IoT) Gateway functionality to its Bluetooth Dual-mode Access Point R
Melbourne, Australia – April 7: M2M Connectivity announces that connectBlue has added Internet of Things (IoT) Gateway functionality to its Bluetooth Dual-mode Access Point RBE221s. The RBE221s is also referred to as a Bluetooth Smart Ready Access Point. Now whenever the RBE221 is connected to the Internet via Ethernet, any web application running on a web server can be used to access data in Bluetooth low energy (Bluetooth Smart) devices connected to the access point.
With the introduction of IoT Gateway functionality in the Bluetooth Dual-mode Access Point RBE221s, the RBE221s can now allow for web applications – via HTTP commands – to simultaneously access any Bluetooth low energy device. As a Bluetooth Smart Ready Gateway, the RBE221s can use the standard Generic Attribute Profile (GATT) to access any Bluetooth low energy (Bluetooth Smart) device.
“Internet of Things is the hottest topic right now and the potential is huge; predictions span from 25–50 billion IoT devices by 2020,” says Rolf Nilsson, CEO of connectBlue. “But in order to fully utilize the IoT architecture, you need a Gateway to get access to the Bluetooth low energy sensor nodes and this IoT Gateway is now added via our Access Point.”
connectBlue is used in demanding wireless applications in the industrial and medical industries. As an example, a popular application for the IoT Gateway in an industrial application would be to read temperature data from various sensors via a web interface on a commercially available device such as a smartphone. In a medical application one can, for instance, access real-time data from various patients’ heart rate monitors in customized web applications on any internet connected web device.
A web application running on a web server can be used to access data in Bluetooth low energy devices connected to the connectBlue Bluetooth Dual-mode (Smart Ready) Access Point RBE221s. This connectivity is enabled through the standard GATT architecture using HTTP commands.
The connectBlue Bluetooth Dual-mode (Smart Ready) Access Point RBE221s is a complete Bluetooth to Ethernet enabler that supports point-to-multipoint connectivity with several slaves / clients simultaneously to the 10/100 Base-T Ethernet network. The RBE221s follows the Bluetooth Specification v4.0 and depending on the connected device, the wireless range can be up to 300 meters. The RBE221s supports the two Personal Area Network (PAN) roles PAN User (PANU) and Network Access Point (NAP) as well as the generic Bluetooth low energy GATT-based services. The RBE221s Bluetooth Access Point can be configured smoothly either via physical configuration buttons and indication LEDs or a web interface. For those that wish to access more advanced settings and use cases, one can also configure the RBE221s through AT Commands and SNMP protocol. The RBE221s is radio type approved for USA (FCC Part 15), Europe (ETSI R&TTE), Japan (MIC – formerly TELEC), Canada (IC RSS) and hazardous location UL/cUL Class 1 Div 2.
About M2M Connectivity
M2M Connectivity is a specialist distributor of leading wireless modules and modems for M2M communications in Australia and New Zealand. M2M Connectivity is a preferred distributor of connectBlue products for industrial short range Bluetooth, WLAN, Zigbee. Our product portfolio of modules, modems and gateways/routers provide connectivity solutions for cellular ( LTE, 3G/NextG, GSM) and Satellite (Iridium, Inmarsat, Globalstar Simplex, Orbcomm,) and GNSS/GPS services. We offer products for short range RS232, KNX, TinyMesh, and M-Bus and customer engineering support.
About Internet of Things (IoT)
Accessing sensor devices over the Internet is a technical evolution which is commonly referred to as the Internet of Things (IoT). To connect a device to the Internet a local low power wireless connection is ideal for example via the connectBlue Multiradio OWL355 module. For most such applications and solutions the device connects to a gateway – such as the connectBlue Bluetooth Dual-mode (Smart Ready) Access Point RBE221s – with Ethernet connection to the Internet.
connectBlue® is a leading provider of reliable wireless solutions for the last hundred meters of connectivity. The robust and high performing products are designed and tested for demanding industrial, medical, measurement / data acquisition and quality assurance applications. Based on Classic Bluetooth, Bluetooth low energy, WLAN and Multiradio solutions, connectBlue markets ready- to-embed wireless modules as well as ready-to-use wireless Serial / Ethernet Port Adapters and Access Points. The connectBlue products are radio type approved for European, US, Canadian, Japanese markets as well as are compliant with EMC, Safety and Medical standards, and the Bluetooth qualification program. connectBlue has its head office in Sweden and local offices in Germany and USA.