Hawk LTE-M / NB-IoT

Description

The Hawk is a robust plug-and-play IoT data logger and sensor hub for cellular LTE-M/NB-IoT networks designed to support an extensive range of sensor integrations.

  • Available in several power and housing variations to best fit your application
  • Flexible I/O Card Architecture caters for plug-in cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors such as SDI-12, I²C, 1-Wire, iButton, 4-20mA, RS-485, RS-232*, Analog Inputs, Digital Inputs, Pulse Counting, Digital Outputs, Switched Power, and more (*coming soon)
  • Ultra-low power design for maximum battery life
  • Multiple external power options including solar power – can also supply power to external sensors
  • Powerful task management to schedule or run tasks based on sensor thresholds and events
  • Over-the-air (OTA) Remote Device Configuration, Management and Firmware Updates
  • Securely send data to any end platform via TCP Direct or HTTPS Webhook
  • Hawk PCB, I/O Cards, and Housing now sold separately – the flexibility to build what you need

This device is designed, developed, and manufactured by Digital Matter

Data Sheet

Download Data Sheet

Technical Specs

ONBOARD CONNECTIVITY

The Hawk PCB is currently available in LTE-M/NB-IoT. IoT Satellite version planned.

LTE-M / NB-IoT Nordic nRF9160 Modem operates on all major global LTE-M and NB-IoT bands

Supported LTE bands:

LTE-M (Cat-M1): B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B18, B19, B20, B25, B26, B28, B66
NB-IoT (Cat-NB1/NB2): B1, B2, B3, B4, B5, B8, B12, B13, B17, B19, B20, B25, B26, B28, B66

SIM Size & Access Internal Micro 3FF SIM

 

ONBOARD DESIGN AND MECHANICS

Operating Temperature -30°C to +60°C
LiPo Charger – At < -10°C and > +45°C the internal backup battery will not be charged as a safety precaution due to the dangers associated with charging batteries at extreme temperatures.
Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe
Cellular Antenna Internal. Supports optional external antenna for maximum range.
GPS Antenna Internal
LiPo Battery Charger Internal
3-Axis Accelerometer 3-Axis Accelerometer to detect tampering (planned in future firmware release)
Diagnostic LED 2 Diagnostic LEDs and Push Button for testing and operational status
Flash Memory Store months of records if device is out of cellular coverage
Onboard Temperature The device reports internal temperature and prevents the internal battery from charging in extreme temperatures.
Internal temperature provides an indication of ambient temperature but may not always be precise. Use an external sensor for precise temperature monitoring.

ONBOARD LOCATION

Module Nordic nRF9160 internal GPS
Constellation GPS
*Location Accuracy ~3m CEP, 50%, GPS, Open sky
GNSS Assistance GPS predicted ephemeris data for greater sensitivity and position accuracy
Low Noise Amplifier GPS signals are boosted by a low-noise amplifier (LNA) allowing operation in low signal

*Positioning accuracy specifications are provided by the GNSS supplier and reflect ideal conditions. Device configuration, installation, environmental conditions, augmentation services, and many other factors may lead to variations in positioning accuracy.

ONBOARD INTERFACES

Digital Inputs 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On >2V, Off <1V
Can be used for pulse counting (max 40Hz)
Plugin Board The versatile and flexible Hawk architecture caters for plug-in cards that define the 9 inputs/outputs, offering limitless options for interfacing to sensors. Flexible onboard output power to power your sensors. See the current card list below or contact us to discuss your requirements.

ONBOARD SMARTS

Auto-APN Auto-APN allows the device to analyze the SIM card and select the correct APN details from a list that is pre-loaded in the device’s firmware
Voltage Monitoring LiPo battery and external voltage readings for “Battery Low” and “Power Loss” alerts
Task Management Powerful onboard task management allows you to schedule tasks or run tasks based on sensor thresholds and events, even when out of cellular coverage

HAWK POWER OPTIONS

Large Rechargeable LiPo – Optional Support for External Power

Powered by 3500mAh rechargeable LiPo battery to support full season deployments. Optionally connect the Hawk to an external power source (6-28V) such as a solar panel or grid power.

Large Rechargeable Battery 3500mAh LiPo rechargeable battery
Input Voltage 6-28V DC (max)
For continuous operation at high temperatures and high output load currents we recommend an input voltage of 12V or higher
Self-Resetting Fuse Built-in self-resetting fuse makes installation simple and safe
Solar Power Support Designed to optionally use a variety of solar panels


D Cell Battery Pack

Powered by 2 x D Cell LTC batteries for a completely self-powered solution

User-Replaceable Batteries 2 x D Cell (3.6V per cell). Batteries not included.
Supported Battery Types *Lithium Thionyl Chloride (LTC)
*Please dispose of Lithium batteries in a safe and responsible manner

HAWK HOUSING OPTIONS

We offer two ultra-rugged housing options

Hawk LiPo Housing (HawkLipo)

Designed to accommodate the PCB, I/O Card, and pre-installed 3500mAh rechargeable LiPo battery

Dimensions 180mm x 119mm x 39mm (7.1” x 4.7” x 1.5”)
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the Hawk can withstand impact, fine dust, and brief submersion
GORE® Vent Allows for pressure equalization while protecting against water and dust ingress
Installation Multiple installation options for securing the device with screws, bolts, cable ties, rivets, and more. Includes 2 cable glands to allow for waterproof cable entry to the housing.

D Cell Housing (Hawk2D)

Designed to accommodate the PCB, I/O Card, and 2 x D Cell LTC Batteries

Dimensions 185mm x 150mm x 30mm (7.3” x 5.9” x 1.2”)
Housing Non-branded housing for optional white-labeling
IP/IK Rating Ultra-rugged and waterproof IP68 and IK08-rated housing ensures the Hawk can withstand impact, fine dust, and brief submersion
GORE® Vent Allows for pressure equalization while protecting against water and dust ingress
Installation Multiple installation options for securing the device with screws, bolts, cable ties, rivets, and more. Includes 2 cable glands to allow for waterproof cable entry to the housing.

DEVICE MANAGEMENT

Flexible Configuration Configure sensor and position update rates, task management scheduling, and more
Device Management Platform Manage, monitor, configure, debug, update, and restart devices remotely from our cloud-based device management system
Configuration App Configurable with DM-Link provisioning tool

INTEGRATION

Third-Party Integration TCP Direct or HTTPS Webhook

SECURITY

Data Security Military-level AES-256 Encryption from device to Device Management Platform to protect the integrity and confidentiality of telematics data. Data forwarded to third-party systems is sent via HTTPS for end-to-end security.

WARRANTY

Manufacturer’s Warranty Two-year manufacturer’s warranty. Exclusions apply.

CERTIFICATIONS

LTE-M / NB-IoT – FCC, CE, ACMA

Certifications are not valid if using the Hawk without a Digital Matter housing or with an external antenna. Visit support.digitalmatter.com for full device certifications for your region.

I/O CARD OPTIONS

The Hawk’s sensor interfaces and protocol and managed by “I/O Cards” – a range of plug-in Input/Output cards standardized for common applications.
See the current card list below or contact us to discuss your requirements

AgTech1

Digital Input 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On >2V, Off <1V
Can be used for pulse counting (max 40Hz)
Digital Outputs 1 x switched ground
I²C Yes
SDI-12 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire® or iButton® Yes
4-20mA 1 x 4-20mA input

AgTech2 (available soon)

Analogue Inputs 4 x Analogue Input (0-30V range)
Digital Output 1 x switched ground
SDI-12 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire® Yes

RS-1

Analogue Input 1 x Analogue Input (0-30V range)
Digital Input 1 x Digital Input with configurable pull up/pull down
0-40V DC input range
On/Off thresholds: On >2V, Off <1V
Can be used for pulse counting (max 40Hz)
Digital Outputs 1 x switched ground
RS485 Yes
Switched Power Out 3.3V switched power for sensors
Switched Sensor Power 5V or 12V selectable power for sensors
1-Wire® Yes
4-20mA 1 x 4-20mA input
Talk to Sales